How Much Does A Tin Roof Cost

The overall average cost of tin roof installation spent by most American homeowners is roughly $5,700. This amount is derived from the common price of tin roof which is $4 per square foot. However, metal roofs could run anywhere between $3 and $15 depending on the exact material variety, brand and even the location where it was purchased.

It is important to take note that the average cost directly reflects the average dimension of American homes. Most regular houses in the United States measure about 24 inches by 45 inches, which spans a total living space of about 1,500 square feet.

The indicated price above does not include other enhancements and improvement costs. The excluded expenses feature the following:

• Upgrades

Homeowners also prefer waterproof additions for their tin roof installation. A waterproofing membrane called underlayment costs $61 per square foot. This addition prevents access of moisture and other substance into the steel frames. It also bolsters protection from weather elements.

• Repairs

Excluding from the tin roof prices is the necessary repairs needed after a certain duration of exposure. Mild repairs entail daubing roof sealant onto roof fissures. A complete coverage for a conventional roof could cost $850 to $1000.

Return On Investment

For one to fully understand how the cost of tin roof reaps a relatively high return on investment, it is also important to compare average tin roof prices with other roof materials. Here are other traditional roof materials worth comparing to tin roofs:

Tile roofing: $11,700 to $17,700

Roofing shingle: $4,960 to $9,034

Slate roofing: $25,000

Wood shake roofing: $12,700

So how much does a tin roof cost compared to any of these materials? At first look, the only more economical option in the list above is roofing shingle. The lowest average cost is almost $1000 less. However, a keen homeowner looks beyond the market price and define cost efficiency alternatively.

• Efficiency by duration

The cheapest material on the generic list (shingles) can only last 12 years. Special shingles with architectural laminate can stretch up to 30 years. By comparison to properly installed tin roofs, the latter material can extend beyond 50 years. This means you will be paying a total of $14,880 in the span of a tin roof’s lifespan. Hence, you get a better deal with tin roof.

By the same comparison, tile roof lasts for 50 years while wood shake roof last for 30 years. The only material that can outlast metal roofs like tin is premium slates, which can span an extent of a full century. But all of these materials are twice the cost of tin roofs.

Based on the natural lifespan of materials alone, you have saved about $5000 for over five decades in choosing tin roof than other types of shelter resource.

• Efficiency by insulation

When you have to factor in the equation the utility bills you need to pay, going for tin roof has its own advantages. Tin roofs have the best chance of withstanding solar heat, bouncing off as much as 70% of the summer daylight energy and keeping your home relatively cool. Saving costs from air-condition is a good return on investment.

It is important to take note, however, that 70% solar reflectivity is only possible when you use cool roof colors. Hence, it is always beneficial to be quite meticulous about your selection instead of randomly choosing any tin roof variety. The cool color spectrum includes white, green, purple, and light shades of blue like turquoise and teal.

Warm colors can only bounce of about 25% solar light. Furthermore, they are not impervious to ultraviolet rays. Hence, choosing cool colors can maximise your return on investment.

• Efficiency by energy tax credits

You may not be an enthusiastic ecologist, but the government has always been keen on environmentally friendly options. When it comes to choosing building materials for your home, there are clear advantages when it comes to choosing the most ecological components around.

One of the most well-known incentives that the government has introduced is the Energy Star Federal Tax credit. In essence, homeowners using eco-friendly materials can avail tax deductions based on the grade of the material.

If you use an Energy Star labelled tin roof, you can save up a huge discount percentage. So how much does a tin roof cost, then? When you factor in the accounted tax credits, this roof costs 30% less in your overall taxes.

• Efficiency by insurance rates

Lastly, the best way to get the most out of choosing tin roof is its propensity to reduce insurance rate. Homeowners invest a visible portion of their money in keeping their homes intact. The roof is one aspect that determines how much you will need to invest in terms of indemnity coverage.

Depending on your location, insurance rate is determined by how best your home can withstand two most prevalent homewrecking elements – fire and hail. In essence, a roofing material that best withstand these elements automatically translates to how much less a homeowner is going to pay for the indemnity coverage.

Metal roofs like tin often earn the highest grade in terms of fire and hail resistance. Better yet, this appraisal only pertains to generic varieties (not premium brands). In essence, tin roofs enable you to pay less insurance rates than other types of roofing.

Top 10 Cities With Labor Cost Discount

You can take advantage of your own location for you to reduce the overall cost of tin roof installation. These cities have labor cost discounts that are higher than the average national fee. Consider yourself fortunate if you live in the following municipalities.

Collins, Mississippi = 44% less

Garland, North Carolina = 44% less

Kingstree, South Carolina = 42% less

Milnor, North Dakota = 40% less

Arcadia, Florida = 39% less

Chadbourn, North Carolina = 36% less

Kunkletown, Pennsylvania = 34% less

Palm Coast, Florida = 32% less

Conway, North Carolina = 29% less

Holy Hill, South Carolina = 27% less